ورود به حساب ثبت نام جدید فراموشی کلمه عبور
برای ورود به حساب کاربری خود، نام کاربری و کلمه عبورتان را در زیر وارد کرده و روی “ ورود به حساب” کلیک کنید.





اگر فرم ثبت نام برای شما نمایش داده نمیشود، اینجا را کلیک کنید.









اگر فرم بازیابی کلمه عبور برای شما نمایش داده نمیشود، اینجا را کلیک کنید.





صفحه 4 از 5 نخست 12345 آخرین
نمایش نتایج: از 31 به 40 از 46
  1. #31
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    Octoplus JTAG PRO v.1.2.2 - 'Box not connected' fix and more!

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.2 is out!

    Dear Medusa Pro users,

    Due to some architecture bug in MCU we use and our firmware particularities many of you may have encountered "Box not connected" issue and total incapability to repair phones via eMMC interface. Today we are glad to announce that the solution has been found. Below you will find a tutorial on how to repair this problem, in somewhat unusual manner though


    Also added support for HTC Desire 601, LG Nexus 5x, Samsung Galaxy J3, Galaxy S3 Progre, Lenovo IdeaTab!

    Octoplus Box JTAG PRO Software v.1.2.2 Release Notes:

    Added support for the following models via eMMC:

    • HTC Desire 601 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H790 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J320H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SCL21 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo A3000F - Read/Write/Erase, Easy Repair, Factory Repair (via scatter), Constructor for Repair Files

    Updated help and pinouts in Smart Repair File for LG MS345 (please re-download SRF).

    Improved showing of progress status while writing scatter firmware of MediaTek based devices.

    Fixed “Cancel” operation for process of writing scatter firmware.

    Improvements in "Content Extractor":

    • Improved process of searching contacts
    • Improved exporting of contacts - added UTF-8 support while exporting into text formats


    Some GUI changes.

    Firmware of Medusa Pro Box has been updated! To update the firmware, please connect the box and only then run the Software. Also you can update box firmware via “Update Box Firmware” button at “Welcome” tab in Software.

    All pinouts and Repair procedures are described in Software manuals ("Help" button in Software).

    How to Repair box firmware, if box not detected by PC and Box status in Octoplus Pro JTAG Software is “Not connected” after firmware updating.


    To repair box firmware, do the next:

    1. Disconnect all Boxes and other devices from PC.
    2. Run the Octoplus Pro JTAG Software.
    3. Open Control Panel -> Device Manager.
    4. Open (disassemble) Medusa Pro box.
    5. Connect the box to PC via USB cable.
    6. Heat up IC U6 (smaller square MCU) on PCB using hot air gun or soldering iron at 150 C (300 F) for a few seconds till “libusb-win32 devices / HSJTAG V0x100” device appears in PC Device Manager and Box status in Octoplus Pro JTAG Software becomes “Connected”. Also LED’s will start blinking at that moment.

    7. Go to “Welcome” tab in Octoplus Pro JTAG Software and press “Update Box Firmware” button.
    8. Box firmware should be updated to version 1.13.


    Note! After repairing box firmware you shouldn’t use previous versions of Octoplus Pro JTAG Software, please always use the latest actual software version.

    Note! Tampering seals to repair box won't void your box warranty.

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )

  2. #32
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.3 is out!

    Released new Box firmware v.1.14, Reset FRP for Qualcomm-based devices, Software improvements and fixes.

    Octoplus Box JTAG PRO Software v.1.2.3 Release Notes:
    Added Reset FRP lock (Reset FRP button at Factory repair tab in Software) for Qualcomm-based devices. With this option you can Reset FRP via eMMC connection
    Released Box firmware v.1.14. In this firmware version fixed Read/Write operations for Hynix and old Samsung eMMC flash chips. Also improved connection procedure for 4-bit Bus Mode and improved stability
    Improved Erase operation (now even more faster) while erasing selected partition(s)
    Improvements in Partition Manager:

    • Added Status Bar (Speed, Progress, ETA)
    • Fixed error with saving selected partitions as *.mpt
    Some GUI changes
    All pinouts and Repair procedures are described in Software manuals ("Help" button in Software)
    Note! After repairing box firmware you shouldn’t use previous versions of Octoplus Box JTAG PRO Software, please always use the latest actual software version.


    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  3. #33
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.3 is out!

    Released new Box firmware v.1.14, Reset FRP for Qualcomm-based devices, Software improvements and fixes.

    Octoplus Box JTAG PRO Software v.1.2.3 Release Notes:
    🐙 Added Reset FRP lock («Reset FRP» button at «Factory repair» tab in Software) for Qualcomm-based devices. With this option you can Reset FRP via eMMC connection
    🐙 Released Box firmware v.1.14. In this firmware version fixed Read/Write operations for Hynix and old Samsung eMMC flash chips. Also improved connection procedure for 4-bit Bus Mode and improved stability
    🐙 Improved Erase operation (now even more faster) while erasing selected partition(s)
    🐙 Improvements in «Partition Manager»:

    • Added Status Bar (Speed, Progress, ETA)
    • Fixed error with saving selected partitions as «*.mpt»
    🐙 Some GUI changes
    🐙 All pinouts and Repair procedures are described in Software manuals ("Help" button in Software)
    Note! After repairing box firmware you shouldn’t use previous versions of Octoplus Box JTAG PRO Software, please always use the latest actual software version.


    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  4. #34
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Medusa PRO v.1.2.4 is out!

    Released support for Qualcomm MSM8909 and MSM8916 CPUs, different USB loaders added.
    Also added support via USB for Huawei SCL-L01, Lenovo A6000, LG H635
    and support via eMMC for HTC One X PJ64100, OPPO U705T, Samsung GT-I9003, LG P930, LG E440.


    Medusa PRO v.1.2.4 Release Notes:

    - Released support for Qualcomm MSM8909 and MSM8916 CPUs. Different USB loaders added. Read/Write operations are supported.

    - Added support for the following models via USB:

    • Huawei SCL-L01 - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • Lenovo A6000 - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H635 - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files


    - Added support for the following models via eMMC:

    • HTC One X PJ64100 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • OPPO U705T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung GT-I9003 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG P930 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG E440 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files


    - New features and improvements in "Content Extractor":

    • added support of Full flashes (dumps), which don’t contain partitions inside
    • improved Search operation for media files
    • improved Search operation for contacts and SMS
    • improved recognizing of User data partitions


    - Some GUI changes

    - All pinouts and Repair procedures described in the manual ("Help" button in the software)

    Medusa - Ultimate Breakthrough in the Phone Repair!

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  5. #35
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.5 is out!

    Released support for Qualcomm MSM8992, USB LG loader added.
    Also added support via USB for LG H815, LG H818P, LG K600, LG LS991 (in test mode), Huawei Y550-L01, Huawei G620S-L01
    and support for Samsung SM-J100H (One SIM) via eMMC!


    Octoplus Box JTAG PRO Software v.1.2.5 Release Notes:
    Released support for Qualcomm MSM8992, USB LG loader added. Read/Write/Full Erase operations are supported
    Added support for the following models via USB:

    • LG H815 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H818P - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG K600 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS991 (in test mode) - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei Y550-L01 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G620S-L01 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via eMMC:

    • Samsung SM-J100H (One SIM) - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    All pinouts and Repair procedures described in the manual ("Help" button in the software)
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  6. #36
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.5 is out!

    Released support for Qualcomm MSM8992, USB LG loader added.
    Also added support via USB for LG H815, LG H818P, LG K600, LG LS991 (in test mode), Huawei Y550-L01, Huawei G620S-L01
    and support for Samsung SM-J100H (One SIM) via eMMC!


    Octoplus Box JTAG PRO Software v.1.2.5 Release Notes:
    🐙 Released support for Qualcomm MSM8992, USB LG loader added. Read/Write/Full Erase operations are supported
    🐙 Added support for the following models via USB:

    • LG H815 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H818P - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG K600 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG LS991 (in test mode) - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei Y550-L01 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G620S-L01 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via eMMC:

    • Samsung SM-J100H (One SIM) - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software)
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  7. #37
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.6 is out!

    We released support for "Qualcomm MSM8x26" cores, added eMMC write verification, added support via USB for LG H962, K420N, D290N and support for Samsung SM-J700H, LG D290N, Huawei G526-L11 via eMMC.

    Octoplus Box JTAG PRO Software v.1.2.6 Release Notes:
    Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported.
    Added support for the following models via USB:

    • LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    Added support for the following models via eMMC:

    • LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    All pinouts and Repair procedures described in the manual ("Help" button in the software).
    * This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software.


    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  8. #38
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.6 is out!

    We released support for "Qualcomm MSM8x26" cores, added eMMC write verification, added support via USB for LG H962, K420N, D290N and support for Samsung SM-J700H, LG D290N, Huawei G526-L11 via eMMC.

    Octoplus Box JTAG PRO Software v.1.2.6 Release Notes:
    🐙 Released support for "Qualcomm MSM8x26" cores (new USB loader added). Read/Write/Full Erase operations are supported.
    🐙 Added support for the following models via USB:

    • LG H962 - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG K420N - Read/Write/Erase Full, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D290N - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    • LG D380* - Read/Write, Easy Repair, Partition Manager, Constructor for Repair Files.
    🐙 Added support for the following models via eMMC:

    • LG D290N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Samsung SM-J700H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    • Huawei G526-L11 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files.
    🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software).
    * This device is already supported via USB in old Medusa Software, it is just revised and added to Medusa Pro Software.


    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  9. #39
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.7 is out!

    Uploaded “Live logs” for most supported devices in to the Support Area.
    Added support via USB for Lenovo S856, Huawei G6-L11, Huawei G620-A2 and
    support for Samsung SM-J500H, LG H788, LG H343 via eMMC.


    Octoplus Box JTAG PRO Software v.1.2.7 Release Notes:
    Added support for the following models via USB:

    • Lenovo S856 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G6-L11 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G620-A2 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added support for the following models via eMMC:

    • Samsung SM-J500H - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H788 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H343 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    Uploaded “Live logs” (software logs with the information about correct device data connection) for most supported devices in to the Support Area.Live logs” will be useful for checking correctness of your device connection - just compare log of connection operation of your device with “Live log” from the Support Area.

    Added more detailed operations’ logging

    All pinouts and Repair procedures described in the manual ("Help" button in the software)
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  10. #40
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,388
    3,091
    2,040
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.7 is out!

    Uploaded “Live logs” for most supported devices in to the Support Area.
    Added support via USB for Lenovo S856, Huawei G6-L11, Huawei G620-A2 and
    support for Samsung SM-J500H, LG H788, LG H343 via eMMC.


    Octoplus Box JTAG PRO Software v.1.2.7 Release Notes:
    🐙 Added support for the following models via USB:

    • Lenovo S856 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G6-L11 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Huawei G620-A2 - added Read/Write/Full Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added support for the following models via eMMC:

    • Samsung SM-J500H - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H788 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG H343 - added Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files

    🐙 Uploaded “Live logs” (software logs with the information about correct device data connection) for most supported devices in to the Support Area.Live logs” will be useful for checking correctness of your device connection - just compare log of connection operation of your device with “Live log” from the Support Area.

    🐙 Added more detailed operations’ logging

    🐙 All pinouts and Repair procedures described in the manual ("Help" button in the software)
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  11. 2
صفحه 4 از 5 نخست 12345 آخرین
نمایش نتایج: از 31 به 40 از 46

کلمات کلیدی این موضوع

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست کنید.
  • شما نمیتوانید پست های خود را ویرایش کنید
  •  
بروزرسانی Octoplus JTAG PRO