ورود به حساب ثبت نام جدید فراموشی کلمه عبور
برای ورود به حساب کاربری خود، نام کاربری و کلمه عبورتان را در زیر وارد کرده و روی “ ورود به حساب” کلیک کنید.





اگر فرم ثبت نام برای شما نمایش داده نمیشود، اینجا را کلیک کنید.









اگر فرم بازیابی کلمه عبور برای شما نمایش داده نمیشود، اینجا را کلیک کنید.





صفحه 3 از 6 نخست 123456 آخرین
نمایش نتایج: از 21 به 30 از 52
  1. #21
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106



    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.1.3 is out!

    Dear Octoplus community,
    Today we are proud to introduce you a whole new built-in module - the 'Content Extractor'!
    This update drastically increases your servicing possibilities, offering such new features as restoring customers data from water drown phones, raw binary forensics and so on and so on, via JTAG or eMMC connection using simple graphical interface! Supporting most of existing file system formats and model-independent it brings a real boost to your repair shop


    Octoplus Box JTAG PRO Software v.1.1.3 Release Notes:
    • Content Extractor – New Possibilities:


    1. View and save (extract) data (files, directories and volumes) directly from the device trough eMMC or/and JTAG interface
    2. View and save (extract) data (files, directories and volumes) from binary dumps (with Full Flash), which have been read from the device
    3. All popular file systems are supported: ext2, ext3, ext4, NTFS, FAT
    4. Ability to save selected files, directories and volumes on user’s hard drive
    5. Easy extract, view and save contacts
    6. Easy extract, view and save pictures
    7. Easy extract, view and SMS messages
    8. Preview graphic files (and their cache)
    9. Ability to work with pictures and media files using computer’s operation system
    10. Advanced search:
      - Search files in file systems or in binary dumps of the device
      - Search user’s contacts or SMS messages
      - Search file name of found pictures
    11. Easy and intuitive graphical user interface (GUI)
    • Improved connection via eMMC interface.
    • Uploaded improved SRF for H345 into the Supprot Area.
    • Box firmware has been updated! To update the firmware, it is necessary to connect the box and only then run the Software.



    You wanted – you got it! Please feel free to leave your suggestions and feedback below.



    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )


    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )

  2. #22
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    Octoplus JTAG PRO Software v.1.1.4. LG Factory Repair feature has been released!

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.1.4 is out!

    LG Factory Repair feature has been released!

    Octoplus Box JTAG PRO Software v.1.1.4 Release Notes:

    🐙 Added LG Factory Repair feature!
    ....You can try to repair LG devices via eMMC by using original LG firmware * («*.tot", "*.kdz" and "*.dz" versions of firmware are supported!).
    ....This feature can be useful in case, if you haven’t got the working device to prepare Repair file or haven’t got a chance to read out Full flash; or device you want to repair currently is not supported.

    🐙 Fixed and improved Content Extractor.
    ....- Fixed GUI delay while analyzing contacts, SMS and pictures.
    ....- Fixed issue with contacts’ export to VCF file.
    ....- Increased stability of FS analysis.
    ....- Increased speed of FS reading and parsing directly from the device.

    🐙 Added Win XP SP3 support (in test mode).

    🐙 Made some GUI changes.

    🐙 Updated repair file for LG LS991 (please re-download SRF file).

    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)

    * NOTE: not all versions of firmware contain necessary partitions for repairing! Try to write different firmware.

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )


    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  3. 1
  4. #23
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    Octoplus JTAG PRO Software v.1.1.5. New Samsung phones have been added
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.1.5 is out!

    We have added support for Samsung Galaxy Core Prime, Samsung Galaxy J1, Samsung Galaxy J1 Mini, Samsung Z1, Samsung Z3 Tizen and Samsung Galaxy Tab 4 8.0!

    Octoplus Box JTAG PRO Software v.1.1.5 Release Notes:

    Added support for the following models via eMMC:

    • Samsung SM-G360T1 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J100H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J105H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-Z130H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-Z300H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T337T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Added LG Factory Repair via USB and JTAG interfaces ("*.tot", "*.kdz" and "*.dz" firmware versions are supported)

    Added support for new type of KDZ firmware with "*.dz" files inside

    All pinouts and repair procedures described in the manual ("Help" button in the Software)



    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  5. #24
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    Octoplus JTAG PRO Software v.1.1.5. New Samsung phones have been added
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.1.5 is out!

    We have added support for Samsung Galaxy Core Prime, Samsung Galaxy J1, Samsung Galaxy J1 Mini, Samsung Z1, Samsung Z3 Tizen and Samsung Galaxy Tab 4 8.0!

    Octoplus Box JTAG PRO Software v.1.1.5 Release Notes:

    🐙 Added support for the following models via eMMC:

    • Samsung SM-G360T1 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J100H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-J105H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-Z130H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-Z300H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-T337T - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Added LG Factory Repair via USB and JTAG interfaces ("*.tot", "*.kdz" and "*.dz" firmware versions are supported)

    🐙 Added support for new type of KDZ firmware with "*.dz" files inside

    🐙 All pinouts and repair procedures described in the manual ("Help" button in the Software)



    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  6. #25
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    Octoplus JTAG PRO v.1.1.6 is out!
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.1.6 is out!

    Samsung Factory Repair feature has been released!

    Octoplus Box JTAG PRO Software v.1.1.6 Release Notes:
    Added Samsung Factory Repair feature!

    You can try to repair Samsung devices via eMMC by using original Samsung firmware * ("*.tar", "*.md5" versions of firmware are supported!).
    This feature can be useful in case, if you haven’t got the working device to prepare Repair file or haven’t got a chance to read out Full flash; or device you want to repair currently is not supported.

    Improved Content Extractor:

    - Increased speed of FS analysis, reading and parsing data from device
    - Fixed issue with pictures preview

    Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software.
    All pinouts and repair procedures described in the manual ("Help" button in the software)
    * NOTE: not all versions of firmware contain necessary partitions for repairing! Try to write different firmware.

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Find out more at: ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  7. #26
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    Octoplus JTAG PRO v.1.1.6 is out!
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.1.6 is out!

    Samsung Factory Repair feature has been released!

    Octoplus Box JTAG PRO Software v.1.1.6 Release Notes:
    🐙 Added Samsung Factory Repair feature!

    You can try to repair Samsung devices via eMMC by using original Samsung firmware * ("*.tar", "*.md5" versions of firmware are supported!).
    This feature can be useful in case, if you haven’t got the working device to prepare Repair file or haven’t got a chance to read out Full flash; or device you want to repair currently is not supported.

    🐙 Improved Content Extractor:

    - Increased speed of FS analysis, reading and parsing data from device
    - Fixed issue with pictures preview

    🐙 Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software.
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)
    * NOTE: not all versions of firmware contain necessary partitions for repairing! Try to write different firmware.

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Find out more at: ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  8. #27
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    Octoplus Box JTAG PRO Software v.1.2.0 Release Notes:* Added support for the following models via eMMC:*

    * _*LG H845*_ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    * _*LG LS770*_ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    * _*LG VS810PP*_ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    * _*Samsung SM-G530H*_ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files


    * Uploaded new SRF for LG LS996 LG_LS996_EMMC_BGND3R_ZV7_5.1.1.SRF*
    * Updated pinouts in old SRF for LG LS996 - please uninstall old SRF (Uninstall custom model file(s) button at Welcome tab in the software) and download new G_LS996_EMMC_BGND3R_ZV4.SRF (Download *.srf button)*
    * All pinouts and repair procedures described in the manual ("Help" button in the software)*

    *Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update. For those who have troubles with updating their box firmware version to 1.11 we introduce the so called "compatibility mode" - possibility to use all the latest software versions with old box firmware, but sacrificing some firmware-based improvements.

    * *When you run software 1.2.0 for the first time it will attempt to update your box firmware to 1.11 if needed. If it fails to do so you will see "box status: not found" message.

    To switch the software to "compatibility mode" do the following:
    1. Close Medusa PRO software
    2. Reconnect the box
    3. Launch 1.2.0 software again

    Also, keep in mind that non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.

    *More info and discussion are *HERE ( ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید ) )
    *___________________________*______________
    *WBR,*
    Octoplus Box Team
    *


  9. #28
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    Octoplus Box JTAG PRO Software v.1.2.0 Release Notes:*🐙 Added support for the following models via eMMC:*

    * _*LG H845*_ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    * _*LG LS770*_ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    * _*LG VS810PP*_ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    * _*Samsung SM-G530H*_ - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files


    *🐙 Uploaded new SRF for LG LS996 «LG_LS996_EMMC_BGND3R_ZV7_5.1.1.SRF»*
    *🐙 Updated pinouts in old SRF for LG LS996 - please uninstall old SRF («Uninstall custom model file(s)» button at «Welcome» tab in the software) and download new «G_LS996_EMMC_BGND3R_ZV4.SRF» («Download *.srf» button)*
    *🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)*

    *Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update. For those who have troubles with updating their box firmware version to 1.11 we introduce the so called "compatibility mode" - possibility to use all the latest software versions with old box firmware, but sacrificing some firmware-based improvements.

    * *When you run software 1.2.0 for the first time it will attempt to update your box firmware to 1.11 if needed. If it fails to do so you will see "box status: not found" message.

    To switch the software to "compatibility mode" do the following:
    1. Close Medusa PRO software
    2. Reconnect the box
    3. Launch 1.2.0 software again

    Also, keep in mind that non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.

    *More info and discussion are *HERE ( ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید ) )
    *___________________________*______________
    *WBR,*
    Octoplus Box Team
    *


  10. #29
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.1 is out!

    With this Software update we are glad to present new advanced features and support of new devices.
    On your numerous requests, we have released feature of repairing devices, which are based on MediaTek CPUs using scatter!
    Also added new eMMC functionality - Boot partition enable and for Samsung eMMC flash chips - Remove write protect and eMMC geometry edit.
    In addition, added support for new Samsung, LG, Lenovo, Alcatel and Oppo devices.


    Octoplus Box JTAG PRO Software v.1.2.1 Release Notes:
    Added Repair devices based on MediaTek CPU's using scatter feature!
    With this feature you can repair different devices via eMMC, which are based on MediaTek CPUs.
    Old and new scatter formats are supported.

    To repair such devices, you should perform the next steps:


    I. If device eMMC is not damaged

    1. Solder the necessary eMMC wires
    2. Connect the device
    3. Go to Factory Repair tab in the Software
    4. Press Repair devices based on MediaTek CPU's using scatter button
    5. Select proper scatter and necessary files
    6. Press Write partitions button
    7. Device repair is done

    II. If device eMMC is damaged

    If eMMC chip is damaged, you can replace it to similar Samsung eMMC chip.
    You should have CID and know properties (Boot1, Boot2, RPMB partitions’ sizes) of eMMC, which you want to replace.



    1. Connect Samsung eMMC to Box (via soldering eMMC wires or via eMMC adapter)
    2. Press eMMC geometry edit button, enter necessary Boot1, Boot2, RPMB partitions’ sizes and set them
    3. Write proper CID of eMMC, which you want to replace
    4. Go to Factory Repair tab in the Software
    5. Press Repair devices based on MediaTek CPU's using scatter button
    6. Select proper scatter and necessary files
    7. Press Write partitions button
    8. After writing will be complete, replace device’s eMMC chip to programmed Samsung eMMC
    9. Assemble the device and power it on. Device repair is done

    Added Remove write protect feature for Samsung eMMC flash chips
    Added eMMC geometry edit feature for Samsung eMMC. With this option you can set Boot1, Boot2, RPMB partitions’ size for Samsung eMMC
    Added Boot partition enable - you can set, whether the device is not boot enabled or select partition, that will be enabled for boot (partition1, partition2 or User area)
    Added support for the following models via eMMC:

    • Samsung GT-I9060I - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G531H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F460K, F460L, F460S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (Thanks to Mr. Hoayeu105 aka AquaSta)
    • Alcatel One Touch 4030 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo P780 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo A390 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo S820 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo A1000F - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Oppo T29 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    Added support for the following models via USB
    (note: these devices are already supported via USB in old Medusa Software, they are just revised and added to Medusa Pro Software):

    • LG D160 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D280N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D320N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    Improved erase operation (now it is up to 200 times faster)
    Fixed some issues with CID edit
    New features and improvements in "Content Extractor":

    • added possibility of restoration of deleted data (files, folders)! To find deleted data, select Show deleted data option in Content Extractor window and parse (read) data from device or file. Note: unfortunately, not all deleted data can be undeleted.
    • fixed errors with searching and displaying data
    • improved cashing process for video-files (in Search media window)
    • added more criteria for inner media-files search
    • fixed issue with window's hanging after some device been connected
    • fixed some GUI problems
    Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software
    Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update.
    Non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.
    It will be not possible to use new eMMC feature (eMMC geometry edit, Boot partition enable, Remove write protect) without updating Box firmware!
    All pinouts and repair procedures described in the manual ("Help" button in the software)

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
  11. #30
    Unes
    پشتیان انجمن
    پشتیبان انجمن
    تاریخ عضویت
    2014/03/11
    نوشته ها
    1,468
    3,159
    2,106
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    Octoplus JTAG PRO Software v.1.2.1 is out!

    With this Software update we are glad to present new advanced features and support of new devices.
    On your numerous requests, we have released feature of repairing devices, which are based on MediaTek CPUs using scatter!
    Also added new eMMC functionality - «Boot partition enable» and for Samsung eMMC flash chips - «Remove write protect» and «eMMC geometry edit».
    In addition, added support for new Samsung, LG, Lenovo, Alcatel and Oppo devices.


    Octoplus Box JTAG PRO Software v.1.2.1 Release Notes:
    🐙 Added «Repair devices based on MediaTek CPU's using scatter» feature!
    With this feature you can repair different devices via eMMC, which are based on MediaTek CPUs.
    Old and new scatter formats are supported.

    To repair such devices, you should perform the next steps:


    I. If device eMMC is not damaged

    1. Solder the necessary eMMC wires
    2. Connect the device
    3. Go to «Factory Repair» tab in the Software
    4. Press «Repair devices based on MediaTek CPU's using scatter» button
    5. Select proper scatter and necessary files
    6. Press «Write partitions» button
    7. Device repair is done

    II. If device eMMC is damaged

    If eMMC chip is damaged, you can replace it to similar Samsung eMMC chip.
    You should have CID and know properties (Boot1, Boot2, RPMB partitions’ sizes) of eMMC, which you want to replace.



    1. Connect Samsung eMMC to Box (via soldering eMMC wires or via eMMC adapter)
    2. Press «eMMC geometry edit» button, enter necessary Boot1, Boot2, RPMB partitions’ sizes and set them
    3. Write proper CID of eMMC, which you want to replace
    4. Go to «Factory Repair» tab in the Software
    5. Press «Repair devices based on MediaTek CPU's using scatter» button
    6. Select proper scatter and necessary files
    7. Press «Write partitions» button
    8. After writing will be complete, replace device’s eMMC chip to programmed Samsung eMMC
    9. Assemble the device and power it on. Device repair is done

    🐙 Added «Remove write protect» feature for Samsung eMMC flash chips
    🐙 Added «eMMC geometry edit» feature for Samsung eMMC. With this option you can set Boot1, Boot2, RPMB partitions’ size for Samsung eMMC
    🐙 Added «Boot partition enable» - you can set, whether the device is not boot enabled or select partition, that will be enabled for boot (partition1, partition2 or User area)
    🐙 Added support for the following models via eMMC:

    • Samsung GT-I9060I - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • Samsung SM-G531H - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG F460K, F460L, F460S - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files (Thanks to Mr. Hoayeu105 aka AquaSta)
    • Alcatel One Touch 4030 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo P780 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo A390 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo S820 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Lenovo A1000F - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    • Oppo T29 - Read/Write/Erase, Easy Repair, Constructor for Repair Files
    🐙 Added support for the following models via USB
    (note: these devices are already supported via USB in old Medusa Software, they are just revised and added to Medusa Pro Software):

    • LG D160 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D280N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D320N - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    • LG D410 - Read/Write/Erase, Easy Repair, Partition Manager, Constructor for Repair Files
    🐙 Improved erase operation (now it is up to 200 times faster)
    🐙 Fixed some issues with CID edit
    🐙 New features and improvements in "Content Extractor":

    • added possibility of restoration of deleted data (files, folders)! To find deleted data, select «Show deleted data» option in «Content Extractor» window and parse (read) data from device or file. Note: unfortunately, not all deleted data can be undeleted.
    • fixed errors with searching and displaying data
    • improved cashing process for video-files (in «Search media» window)
    • added more criteria for inner media-files search
    • fixed issue with window's hanging after some device been connected
    • fixed some GUI problems
    🐙 Box firmware has been updated! To update firmware, it is necessary to connect the Box and only then run the Software
    Please pay attention! As you may have noticed, there is a minor issue with early Medusa PRO boxes firmware update.
    Non-updatable boxes are covered with warranty and entitled for replacement by authorized resellers.
    It will be not possible to use new eMMC feature («eMMC geometry edit», «Boot partition enable», «Remove write protect») without updating Box firmware!
    🐙 All pinouts and repair procedures described in the manual ("Help" button in the software)

    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
    ( مشاهد لینک ها فقط برای کاربران ویژه امکان پذیر میباشد برای ویژه شدن کلیک کنید )
صفحه 3 از 6 نخست 123456 آخرین
نمایش نتایج: از 21 به 30 از 52

کلمات کلیدی این موضوع

مجوز های ارسال و ویرایش

  • شما نمیتوانید موضوع جدیدی ارسال کنید
  • شما امکان ارسال پاسخ را ندارید
  • شما نمیتوانید فایل پیوست کنید.
  • شما نمیتوانید پست های خود را ویرایش کنید
  •  
بروزرسانی Octoplus JTAG PRO